产品说明：抗菌防霉全效水漆是-款超强自洁抗菌抗污染的产品,采用银离子杀菌环保技术，超强耐候性能使墙面历久如新。极佳的遮盖力与延伸性,能有效地覆盖墙体细微裂缝;良好的防霉抗藻能力与超级的耐擦性能,使墙体长久保持清新亮丽的色彩。使您再无后顾之忧,坐拥—个舒适的家。

产品特点：

◎ 采用银离子杀菌环保技术

◎ 自洁抗污渍

◎ 优异的耐擦洗性墙面持久靓丽

◎ 特殊弹性,覆盖细微裂纹

◎ 防水抗碱,坚固耐久

◎ 抗菌防霉,有效抑制多种细菌的生长

基面处理：

◎ 被涂墙面含水量不得超过10%,必须牢固、平整、清洁、无油、无松散物质、中性(PH值=7-9)。

◎ 干燥及重涂时间:表干:30分钟;硬干:1小时;重涂:2小时(25°C)。

施工说明：

◎ 施工条件:5°C以上,相对湿度小于85%。

◎ 涂装体系:刷涂、轮涂、喷涂,无气啧涂效果更佳。墙面处理→—遍底漆→两遍面漆。

◎ 保养:涂膜保养期为7天(温度25°C,50%相对湿度),低温高湿应相应延长。

注意事项：

◎ 请务必于使用前仔细阅读包装文字中的施工说明,以获得可靠和满意的涂装效果。

◎ 如是过敏性皮肤，请在使用中始终佩戴防护用具。

◎ 如不慎沾染眼部，请立即用大量清水冲洗,并寻求医疗救助。

◎ 请不要让儿童或宠物进入施工区域,并将产品放置于接触不到的地方。

◎ 当涂料打翻外漏时,用沙或泥土覆盖后收集并合理处置，切勿把涂料倒入下水道或排水管。

Product Introduction：

Antibacterial and Mildew-proof Full-effect Water Paint is a super self-cleaning antibacterial and anti-pollution product, which adopts environmental protection technology of silver ion sterilization. Its super weather-resistant ability can make the wall everlastingly new, its excellent covering ability and extensibility can effectively cover the fine cracks in the wall, and its good anti-mildew and anti-algae abilities and super scratch resistance ability make the wall keep fresh and bright for a long time, letting you have no worries about the rear and possess a comfortable home.

Product Features：

Adopt environmental protection technology of silver ion sterilization

Self cleaning and stain resistance

Super scrub resistance ability make the wall keep bright for a long time

Special elasticity, and cover fine cracks

Waterproof and alkali resistant, sturdy and durable

Antibacterial and mildew proof, and effectively inhibit the growth of various bacteria

Range of Application:

It is applicable to the indoor painting of high-standard family houses, large and high-end offices, high-class hotels, schools, hotels, club buildings, etc.

Base Surface Treatment:

The water content of the painted wall shall not exceed 10%, and the painted wall must be firm, flat, clean, oil-free, free of loose substances, and neutral (PH value: 7-9).

Drying and repainting time: surface drying time: 30 minutes; dry hard time: 1 hour; repainting time: 2 hours (25°C).

Construction Instructions:

Construction condition: when the temperature is above 5 ° C and the relative humidity is less than 85%.

Coating system: Brush coating, roller coating, spraying, and airless spraying is more effective. Wall surface treatment - primer coating for 1 time - top coating coating for 2 times.

Maintenance: The film maintenance period is 7 days (when the temperature is 25 ° C and the relative humidity is 50%), and the maintenance period shall be extended accordingly in case of low temperature and high humidity.

Matters Needing Attention:

Please carefully read the construction instructions in the packaging text before use, so as to obtain reliable and satisfactory coating effect.

For allergic skin, please always wear protective equipment during construction.

If eyes are accidentally contaminated, please immediately rinse with plenty of water and seek medical assistance.

Please keep children and pets out of the construction area, and keep the product out of reach.

When the coating material is spilled and leaks, please cover it with sand or soil, collect it and dispose it reasonably. Do not pour the coating material into sewers or drains.