产品说明：

德国龙珀优白三合一净味水漆是由环保配方,以优质乳液为基料，采用抗污超白科技生产技术，升级超白配方，持久净白，光泽亮丽，具有超高的耐沾污，易清洁性能。不添加辅助香料，气味清新自然，绿色环保。提高漆膜遮盖力，轻松覆盖基材,使基材密实光滑，且涂刷面积大,保持墙面美丽常新,是家居和工程装修的理想首选。

产品特点：

◎ 升级超白配方，持久净白

◎ 遮盖力强，涂刷面积大

◎ 净味配方，绿色、健康、环保

◎ 具有超高的耐沾污，易清洁性能

适用范围：

适用于宾馆、会馆、幼儿园、商场、酒店、医院等室内墙体表面的涂装，高档住宅、高档写字楼、高档酒店、别墅等室内装修。

基面处理：

◎ 新建墙面:清除表面灰尘、油腻和松散泥灰，如果有空隙请及时修补,确保墙面干燥，整洁平整。确保预涂基材表面湿度小于10%,PH值小于10。

◎ 重涂墙面:铲除旧墙面不牢固的漆膜,清除表面灰尘粉化物和杂质批平打磨,清洗并彻底干燥。预涂基材表面必须牢固、干燥、清洁、平整和无松脱物质。

施工说明：

◎ 施工条件:请不要在潮湿或寒冷的天气(气温低于8°C,相对湿度大于85%)情况下施工,否则不能达到预期的涂装效果。

◎ 涂装体系:先涂产品对应的底漆1~2遍;再涂面漆二遍(建议涂装道数)。

◎ 保养:7天/25°C,低温(28°C)适当延长,以获得理想的漆膜效果。

注意事项：

◎ 请务必于使用前仔细阅读包装文字中的施工说明,以获得可靠和满意的涂装效果。

◎ 如是过敏性皮肤，请在使用中始终佩戴防护用具。

◎ 如不慎沾染眼部，请立即用大量清水冲洗,并寻求医疗救助。

◎ 请不要让儿童或宠物进入施工区域,并将产品放置于接触不到的地方。

◎ 当涂料打翻外漏时,用沙或泥土覆盖后收集并合理处置，切勿把涂料倒入下水道或排水管。

Product Introduction：

German Lonpo Superior White 3 in 1 Odor Removing Water Paint uses environmentally friendly formula and uses high-quality emulsion as the base material. It adopts the production technology of stain resistance and ultra whiteness, as well as upgraded ultra-white formula. The clearness and whiteness is long-lasting, and the luster is bright and beautiful. It has ultra-high stain resistance and the performance of easy to clean. It doesn’t use auxiliary spices, so it smells fresh and natural, and is green and environmentally friendly. It can improve the covering ability of paint film and easily cover the base material, so as to make the base material dense and smooth. Besides, its painting area is large, keeping the wall beautiful and always fresh, so it is the ideal first choice for home and engineering decoration.

Product Features：

Upgraded ultra-white formula, and long-lasting clearness and whiteness

Strong covering ability, and large painting area

Odor removing formula, green, healthy, and environmentally friendly

Have ultra-high stain resistance, and easy cleaning performance

Range of Application:

It is applicable to the painting of the surface of indoor walls in hotels, guild halls, kindergartens, shopping malls, hotels, hospitals, etc., as well as the indoor decoration of high-end residences, high-end office buildings, high-end hotels, villas and so on.

Base Surface Treatment：

For new walls: Remove dust, grease and loose marl from the surface, and if there is any gap, please repair it in time to ensure that the wall surface is dry, neat and level. Ensure that the surface humidity of precoated base material is less than 10% and the PH value is less than 10.

For repainted walls: Remove the weak paint film on the old wall, remove dust, powder and impurities from the surface, and level and polish the surface, clean it and thoroughly dry it. The surface of precoated base material must be firm, dry, clean, flat and free of loose substances.

Construction Instructions:

Construction condition: Please do not work in damp or cold weather (when the air temperature is lower than 8 °C, and relative humidity is higher than 85%), otherwise the expected coating effect cannot be achieved.

Coating system: Coat the primer corresponding to the product 1-2 times, and then coat the top coating 2 times (Recommended number of painting).

Maintenance: 25 °C in 7 days, and lengthen appropriately at low temperatures (28°C), so as to obtain the ideal paint film effect.

Matters Needing Attention：

Please carefully read the construction instructions in the packaging text before use, so as to obtain reliable and satisfactory coating effect.

For allergic skin, please always wear protective equipment during construction.

If eyes are accidentally contaminated, please immediately rinse with plenty of water and seek medical assistance.

Please keep children and pets out of the construction area, and keep the product out of reach.

When the coating material is spilled and leaks, please cover it with sand or soil, collect it and dispose it reasonably. Do not pour the coating material into sewers or drains.